Other Paper Product
Home » products » Folding Packaging » Other Paper Product

Custom Paper  Box Packaging by ITIS Factory

Block A, Huafeng Robot Industry, Nanchang Community, Xixiang Street, Bao`an District, Shenzhen City, Guangdong Province, China
+0086-13632644327
market@szitis.com

Picture album

Brochure/catalog/magazine

7.1 Size size

A4 regular size: 210X285MM

Foreign customers are accustomed to: 216X285MM or 210X297MM

Due to the conventional size limitations of materials in China, when the size of the A4 brochure exceeds 210X285MM, it will waste materials and increase the price

It will be relatively high, so when customers request a size larger than our domestic standard size, we usually try to suggest that customers change the size to

Dimensions up to 210X285MM. Most customers can accept it.

The regular size of A5 is: 140X210MM

Foreign customers are accustomed to: 140X216MM or 148X210MM

Due to the conventional size limitations of materials in China, when the size of A5 brochure exceeds 140X210MM, it will waste materials and increase the price

It will be relatively high, so when customers request a size larger than our domestic standard size, we usually try to suggest that customers change the size to

Dimensions up to 140X210MM. Most customers can accept it.

There are no restrictions on other unconventional sizes.

In general, it is recommended to have a long binding edge for the album (which usually saves costs)

7.2 Cover

There are 4Ps on the cover, with front cover=Cover 1, back cover=Cover 2, back cover=Cover 3, back cover=Cover 4

A. Cover material:

Generally, 250g to 350g double copper paper and matte paper are used, with the most commonly used being 300g double copper paper, with the cover and inner page sizes being the same;

In a few cases, customers may request that the cover hardness be strong, and a single powder card can be used to make the cover. However, in this case, the covers 2 and 3 are different

Either it is not printed, or the printing effect will be inferior to other layouts (because single powder is only coated on one side), and the cover and inner page sizes are the same;

The cover of a hardcover book will be covered with a 1500 to 1800 gray board and then framed with 157 grams of double copper. This type of picture book cover has a higher cost and is generally used

For high-end brochures, the cover will be about 10mm larger than the inner page size;

B. Printing:

4C+0=single-sided printing on the cover, that is, cover 2 and cover 3 are not printed; 4C+4C=Cover double-sided printing

When there is a spot color, it can be expressed as follows: 4C includes 1 spot+4C includes 2 spots

C. Cover surface treatment:

Generally, only the cover and back cover require surface treatment, such as gloss glue, matte glue, oil, UV, localized UV, hot stamping, etc.

7.3 Inner page

Inner page: The most commonly used ones are 128g or 157g double copper/matte paper; Some customers may request 200 grams, or even 250 grams,

300g is used as the inner page, but 250g and 300g are absolutely not allowed. 200g needs to be printed in light or unprinted crease positions

The situation can be handled, otherwise the dark areas where the brochure is folded in half will explode with many white spots, which are common among customers

Great opinion.

Book paper inner pages: usually 80g or 100g. Book paper inner pages are less used for picture books and more for publishing, which can be printed

Brushing, but the effect is not as good as double copper and matte powder, so when using book paper to make inner pages, many times it is simple printing content, or single

Black. "One School" sets sail for dreams

thirty

7.4 Binding: Glue/Saddle binding method

Riding DingTalk: 128 grams of inner page P must be less than 52P, 157 grams of inner page P must be less than 48P, and 200 grams of inner page P must be less than

36P; The P-number of the entire album must be a multiple of 4. The disadvantage of horse riding nails is that if you open and use them multiple times, the middle page will be easier to use

The advantage of detachment is that it is cheap and easy to make goods quickly.

Adhesive binding: It is recommended to have a minimum of 32P, and the P count of the entire album must be a multiple of 4. The disadvantage of adhesive binding is that the spine of the book cannot

Fully display it.

Lockstitch adhesive binding: It is recommended to have a minimum of 32P. The number of P in the entire picture album must be a multiple of 4, and the binding effect is good. When opening the page,

The printed content on the inner page can be fully displayed.

Hard cover hardcover: It is recommended to have a minimum of 28P, and the number of P in the entire album must be a multiple of 4. It is based on the locking adhesive installation

Adding hard cover, high grade, and expensive price.

YO Circle Stapling: It is recommended to have a minimum of 20P, and the number of P in the entire album must be a multiple of 2. Punch holes on the sides of all pages before

Thread the coil, and the printing display effect is good (the overall effect depends on the customer's preference)

Recommended binding order:

1. Those who can ride horse nails should try to ride horse nails as much as possible; 2. It is a locking adhesive installation; 3. Adhesive installation; 4. Hard cover decoration and YO circle are usually provided by customers

Out.

7.5 QTY quantity

Because brochures involve a large number of printing layouts, typically a brochure requires several or even one to twenty sets of printing layouts (depending on size),

So when the quantity is small, most of the cost of the brochure is included in the printing start-up fee. So the recommended price for the brochure is generally 1000 yuan

Above this, the MOQ is set at 500, and the larger the quantity, the lower the unit price of the brochure. "One School" sets sail for dreams

thirty-one

Chapter 8 Playing Cards and Game Cards

8.1 Common Materials

250g/300g/350g/400g double copper or 280g gray core paper; Due to the fact that 250g is too soft and thin, it is used less frequently. 400g

Printing too thick incurs high costs and is used less frequently; So the most commonly used materials are 300g, 350g double copper, and 280g gray core paper.

8.2 Dimensions

The size of the length X width MM card set is generally not too large, and the most commonly used playing card sizes are: Asian hands small: 57x87mm, European

Zhou Ren Shou Da: 63x88mm

When quoting, it is recommended to refer to the existing knife mold size table. When there are similar sizes, we can suggest that customers use our existing knife molds

It can save about 1000 yuan in tooling costs, especially when the quantity is small, which has a significant impact on the price.

8.3 sheets

It depends on the customer's needs, but according to the number of playing cards we commonly use, there are 54 cards including big and small kings, and 52 cards excluding big and small kings

Customers often request quotes for these two quantities. Of course, this quantity is for reference only. Customers will have their own actual needs, and the number of sheets is a consideration

The influence of the grid is significant, and it must be provided by the customer.

8.4 Printing

Usually, card sets are mostly printed on both sides (with 4C double-sided printing being the most common), with the same printing on the back and not on the front

Similarly, it is worth noting here that as long as the front printing is different and the back printing is the same, there is no impact on the price

Impact); If one side of the card is printed in monochrome, it can save some printing costs, but the entire set of cards must be printed on one side

Color (must be the same color), otherwise the cost will be the same as four colors.

8.5 Surface treatment

Playing cards have a large number of cards and are usually treated with double-sided oiling to save costs and facilitate shuffling; and

Some students who study cards may choose to use matte or light glue to appear more expensive, but the cost is high and not suitable for shuffling..

UV treatment: In order to make the card more high-end, a certain amount of local UV treatment can be applied.

Hot stamping process: Try not to use it as much as possible. If every paper card needs to be hot stamped, it will result in a relatively high total cost. Generally, customers are more likely to

I can't accept it much.

8.6 Quantity

MOQ 500 sets, it is generally recommended to quote 1000 sets or more

8.7 Packaging

Before packing cards into boxes, they are usually arranged and matched in order. If customers have any requirements, they will be sorted in what order

If so, it must be explained before printing, otherwise the sorting in the later stage will be easily confused, resulting in increased costs and delayed delivery times.

Some customers may request that the entire set of cards be directly shipped after heat shrink without the need for additional small boxes to be packed.

The regular packaging is a double insertion box made of 300g single powder cards. After the cards are directly packed in the box, they are heated and shrunk on the box before being packed as usual

Carton shipment; For those with high packaging requirements, gift boxes such as Tiandi boxes, book shaped boxes, drawer boxes, etc. can be used. "One School" sets sail for dreams

thirty-two

Chapter 9 Envelopes

Paper envelope

Knife pattern diagram one Knife pattern diagram two

Two ways to display Chinese envelopes

Western style sealing and molding

Western style sealing unfolding Western style sealing knife mold diagram

Western style sealing

Diamond Seal Blade Mold Diagram Diamond Seal Forming

Diamond Seal

Chicken Eye Envelope Knife Mold Drawing Chicken Eye Envelope Forming

long

wide

The Chicken Eye Envelope "One School" sets sail for dreams

thirty-three

Material application:

1、 Two, three, and three types of envelopes are commonly made of the following materials: 80g to 150g book paper, (white black brown) kraft paper, and thin paper suitable for

It is not suitable to directly shape with an envelope machine if it is too thick.

The commonly used material for envelopes is uncoated paper, because coated paper needs to be glued after printing, and the glued paper cannot be placed on the envelope

The machine is automatically formed and can only be manually bonded, so the cost will be very expensive.

Some customers may also request to use coated paper such as double copper, single powder, and gray card to make envelopes. If the effect is good, it must be covered with film.

The fourth type is the corn envelope, which adds the technology of corn metal buckle on the basis of Chinese sealing. It has round paper pieces and long ropes, which can be

After packing the inside, seal it with a long rope. Due to the hard and protruding metal buckle of the chicken eye envelope, it will print deeper when squeezed

For indentation, it is generally recommended to use thicker materials that are more suitable. The commonly used materials are: 150g to 300g (white black brown)

Kraft paper, try not to use book paper as it is prone to damage. You can use single powder cards, gray cards, double copper cards, etc. (200-300 grams)


01
First-rate service
Custom ring box packaging is our specialty, and under comprehensive systematization and standardization, the entire process from quotation to final shipment is automated...
02
Professional spirit
We are deeply committed to custom necklace box packaging. We have fully standardized customization, standardized design, and standardized production, but we retain comprehensive autonomy to make your packaging more personalized...

03
First-class quality​​​​​​​
With over 20 years of experience in custom earring box packaging, combined with modern automated equipment production, we are able to achieve higher standards of quality while possessing production capacity...

04
Popular trust
For over 20 years, we have developed our own way of survival in the large market of customized jewelry boxes: treating people with integrity...

05
Reasonable Price
We are constantly optimizing costs, from per capita output, from reasonable and wasteful raw materials, to meticulous management of every detail, ultimately resulting in more affordable custom bracelet box packaging...
06
Sustainable development
We have a fully automated archiving and organization system for all the projects mentioned by your company here. No matter when or where you need to access relevant information and materials, our company can quickly provide you with...

CONTACT US

  0086-13632644327
 Block A, Huafeng Robot Industry, Nanchang Community, Xixiang Street, Bao`an District, Shenzhen City, Guangdong Province, China, P.R.518102

QUICK LINKS

Copyright © 2023 Shenzhen ITIS Packaging Products Co., Ltd. All rights reserved.
Privacy Policy / Support By leadong